Changhong Electric LT1512E, LT1712E, LT2012E, LT2, Инструкция по эксплуатации, Страница: 18 / 26

PAGE
18
To automatically adjust the picture position, clock, phase and color temperature to a
preset optimum value. This mode is invalid in DOS mode.
Note: The PC Setup menu is only available in the PC signal source.
Other Functions .
●
Volume Control
1. Press
【
V+
】
to increase or
【
V-
】
to decrease the volume when there is no menu on the
screen. The Volume bar will disappear if there left idle for more than 6 seconds.
2. Press the
【
MUTE
】
button on the remote control to turn On/Off the MUTE mode. In Mute
mode, a sign of
“
Mute
”
in red will appear on the upper-right corner of the screen. This
symbol is hidden when the menu operation is entered, but the feature is still valid. It appears
again when the menu operation is exited. When there is no valid signal input, the TV will be
mute (but no mute symbol) with a blue background.
●
Sound Mode Selection
Press
【
S.MODE
】
to select between Personal, News, Theater and Music modes and
activate the Picture Mode. The latter three modes are default setting that cannot be adjusted.
Entering the Personal mode allows setting to the preferred mix.
Sound Mode Sound Quality
Personal
For the user’s preference
News For general programs of conversations and news report
Theater For better audience effect as soft, magnificent and vivid
Music For general music programs
Note: The operation and setting of the Volume Control are applicable to all the signal
sources.
● Picture Mode Selection
Press
【
P.MODE
】
to Switch among Personal, Soft, Normal and Rich modes.
Picture Mode Picture Quality
Personal
For the user’s preference
Soft For more mellow pictures
Normal For general programs
Rich For better visual effect such as magnificent and vivid
Note: The setting of this selection is in the same state are applicable to all the signal
sources.
●
Recall
In TV mode, press
【
RECALL
】
on the remote control to return to the previous channel or
signal source.
●
Signal Switch
Press
【
AV
】
on the remote control to select between the signal sources: TV, AV, RGB,
YPbPr and PC. The order is as below:
YPbPr
PC TV AV RGB