Chandler Engineering Ametek Quizix 5000 Series, Руководство пользователя

Страница: 10 / 155

Chandler Engineering
5000 SERIES PUMP MANUAL
[8]
Table 1-1 The 5000 Series Pump
Cylinders
Model
Maximum
Pressure
Maximum
Flow Rate
Piston
Stroke
Volume
Piston
Diameter
Q5002 2,500 psi 60 ml per minute 37 ml 1.00 inch
Q5005 5,000 psi 30 ml per minute 21 ml .750 inch
Q5007 7,500 psi 3.75 ml per minute 21 ml .750 inch
Q5010 10,000 psi 15 ml per minute 9.3 ml .500 inch
Q5010 10,000
psi
2.0 ml per minute 9.3 ml .500 inch
Q5020 20,000 psi 7.5 ml per minute 5.2 ml .375 inch
1.2 Primary Components
The 5000 Series Pump System is designed as a modular component system. Pump systems can include
from one to eight Q5000 pump controllers, using any of the pump cylinder models shown in Table 1-1
above. Two pump cylinders are necessary for continuous flow of a single fluid. A standard Q5210 two–
cylinder pump system and standard Q5410 four–cylinder pump system typically include the following
components:
Table 1-2 Primary Components
Q5210 2–Cylinder System Q5410 4–Cylinder System
2 pump cylinders (choice of models) 4 pump cylinders (choice of models)
2 CV–310 valves 4 CV–310 valves
2 pressure transducers 4 pressure transducers
1 CMD-5000 Dual Controller Driver 2 CMD-5000 Dual Controller Drivers
1 two–cylinder support stand 1 four–cylinder support stand
Plumbing and cables Plumbing and cables
1 PC–compatible computer 1 PC–compatible computer
PumpWorks software PumpWorks software
The 5000 Series two–cylinder pump system (known as a Q5210) is shown in Figure 1-1,
below. A computer can be supplied by the user or purchased from Chandler Engineering as part of the
pump system.