Chandler And Me CMP-15-ANZ, Руководство пользователя

Страница: 9 / 12

Change the Default Settings
& F/C Display
Caution! High Heat Mode
1600W
• With the unit in standby mode (mains switch
"On" and LCD Panel Switch "Off") press and
hold the “set” button for 10 seconds until the
LCD display lights up.
• Press the + or – buttons to toggle between
F and C and then press the “set” button to
confirm your selection.
• Next use the +/- buttons again to select your
default temperature and press the set button
to confirm.
• Now use the +/- buttons again to select your
desired run time hours and press the set
button to confirm.
• Finally press the +/- buttons again to select
your run time minutes.
The melter has two power settings, 600W and
1600W. For most Soy and vegetable waxes you
will only require the 600W mode however for
larger batches and harder waxes you may want to
use the 1600W mode.
Only use this mode once the initial melt is
complete and the tank is more than half full
of melted wax. Using the 1600W setting with
small amounts of wax can cause a sharp rise
in temperature that can damage your wax and
activate the overheat cut out switch.
8