17 DiViS
w w w .
DiViS
D V R . c o m
-- Saving options on warning
--- Save on warning: Keep recording regardless of warning message. (Once database is full, it will start
to overwrite from the first volume.)
--- No save on warning: Stop recording once warning message is on
-- Disk Event: Configure event when message shows up. (Refer to 5.7. Event setup)
-
Allow remote connections:
Allow users to log into the system from a remote location through the
network
-
Code: Give a unique combination of case-sensitive
alphanumeric and numeric character, maximum of 10
characters. It is required to use IP Server.
-
Bandwidth Control: Adjust bandwidth depending on the
connection type. It is recommended to reduce the bandwidth
in order to increase the transmission speed. However, the
image quality will be lower. This control is not available on
MPG series boards.
-
Remote notification of events: Enable and assign remote
client information to be notified. The system is capable of
sending a warning message to the remote client when
motion or sensor is detected. The remote client is notified
through sound, and it will popup if running and minimized. In
order to notify the remote client, make sure to configure the
IP address or Code in “IP / Code”.
-- Method: Select between TCP/IP and Server (when using IP Server)
-- IP / Code: Give IP address or Code (IP server) of remote client to send Notification.
-
Use IP Server:
In case of using IP server, check the box. Since IP Server uses Code to identify
DVR system rather than its IP address, it is possible to connect DVR system with dynamic IP
address. (Code name must be unique for each DVR system)
-- IP Server: IP address of system in which IP Server program is running
(Server must use static IP.)
-- Notify interval: Update DVR system’s IP address to the IP server once in every interval period.
-
Internal program CD burn:
Use CD Burn Program in DVR Program (Windows XP required).
-
External program CD burn:
Click
“
Browse” button to choose external CD Burn Program (CD-
RW). CD burning program will start once CD Burn button is selected in Search program.
-
Setting log off timeout:
This feature allows the administrator to set the amount of time available
for each logged-in session.
