Champion U-H1 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 64

Champion U-H1 Скачать руководство пользователя страница 19

Cleaning (Cont.d)

Model U-LD
1.

Hold drain switch in “UP” position until tank drains completely.

2.

Flip power switch to OFF.

3.

Flush tank interior with fresh water.

4.

Remove the sump filter and strainer plate.

5.

Remove the spray arms.

6.

Clean and inspect the spray arm bearings.

7.

Remove the spray arm end plugs by twisting counter-clockwise and pulling.

8.

Flush the spray arm pipes and nozzles.

9.

Replace the end plugs.

10.

Back flush the sump filter and strainer plate

11.

Thoroughly clean the exterior of the machine. DO NOT HOSE DOWN WITH WATER.

12.

Reassemble the machine. Leave the door open to aid overnight drying.

CAUTION:

DO NOT LEAVE WATER IN WASH TANK OVERNIGHT

DELIMING

Your dishwasher should be delimed regularly depending on the mineral content of your water.
Inspect the machine interior for mineral deposits and use a deliming solution
for the best cleaning results.

NOTE:

Consult your chemical supplier for an appropriate deliming solution.

WARNING:

Deliming solutions or other acids must not come in contact with household bleach
(sodium hypochlorite) or any chemicals containing chlorine, iodine, bromine, or fluorine.
Mixing will cause hazardous gases to form.
Skin contact with deliming solutions can cause severe irritation and possible chemical
burns. Consult your chemical supplier for specific safety precautions.

DELIMING PROCESS

Model U-H1 and U-HB

(Not equipped with chemical dispensing system)

1.

Remove all dishes from machine.

2

Drain the machine and refill with fresh water.

3.

Spray interior walls with delimimg solution and let sit for 5 or 10 minutes
depending on amount of build-up. Add deliming solution to wash tank.
Do not let chemicals sit for longer than 15 minutes.

4.

Push the Green start button and run an automatic cycle.

5.

Repeat Step 3-4 if necessary.

6

Remove the drain-overflow tube and drain the machine.

7.

Refill the machine and run a complete cycle two additional times.
Drain and refill the machine after each cycle to thoroughly flush any
deliming solution from the interior of the machine.

8.

Flip the power switch to OFF.

9.

Drain Machine.

10.

Deliming is complete.

17

MAINTENANCE

!

!

«
...
17
18
19
20
21
...
»

Содержание U-H1

































































Отзывы:

Нет отзывов