14
2.9.3. WiFi
a)
Select ‘Start->Settings->Connections->WiFi’.
b)
Click ‘Search for Networks’, select a network listed.
Follow the installation guide to input a password and
confirm the connection to WiFi.
2.9.4. GPRS/3G Data Connection
a)
Make sure there’s an activated SIM card in the HC3.
b)
Select ‘Start->Settings->Connections->Connections’.
c)
Click ‘Add a new modem connection’.
d)
Input connection name “SimCard”, select ‘Cellular
Line (GPRS)’, click ‘Next’.
e)
Input ‘Access point name’, click ‘Next’.
f)
Click ‘Finish’ and add new connection successfully.
g)
Click ‘Manage existing connections’.
h)
Click and hold on “SimCard” and select ‘Connect’.
i)
If there is the identifier on the signal icon in the top
right corner, this indicates a successful connection.
3. Useful Functions
3.1. Screen Response
Select ‘Start-> Settings-> System-> Screen‘,
click the ‘Align Screen‘ icon and follow the
guide to align the screen.
Select ‘Start-> Settings-> System-> Backlight’
to adjust backlighting according to the guide.
3.2. Adjusting the Backlight
Continued on the next page
Содержание HC3
