manualshive.com logo in svg

Champion DH-1000, Руководство по установке, Страница: 11 / 80

Поделиться
Скачать
Champion DH-1000 Скачать руководство пользователя страница 11

5

_____________

Installation Guide

;

Electrical Connection DH-1000

1. Locate the control cabinet keys on the rear of the control cabinet.

2. Remove 1 key to unlock the cabinet; do not  remove the other key.

3. Unlock the control cabinet and remove the cover.

4. Locate the power cable knock out and main terminal block on the left-side of the cabinet.

5. Locate the Machine Electrical Connection Data Plate mounted near the terminal block.

6.  Connect the electric service to the dishwasher.

Warning:

Disconnect the main electric supply and place a tag at the fuse or disconnect switch
indicating that work is being performed on that circuit.

Warning:

The dishwasher must be electrically grounded according to all local codes
and regulations governing the installation of electrical service.

The

 MACHINE ELECTRICAL CONNECTION DATA  PLATE 

is the certified authority for the

dishwasher power requirements. 

DO NOT

 use electrical data from any other source

unless an authorized factory representative instructs you to use other data.

Cable knock-out

Machine Electrical
Connection Data Plate

Main terminal block

Powering the dishwasher without performing the Initial Start-up

may damage the dishwasher's electrical circuits.

ATTENTION   

ELECTRICIAN

The Model  DH-1000 dishwasher 

must  not  be  turned ON

 at the dishwasher's

power switch  located on the front of the top-mounted control cabinet

without performing an Initial Start-up at the same time.

  DH-1000 • Electrical Connection

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Содержание DH-1000

















































































Отзывы:

Нет отзывов