4
USE THE FOLLOWING INSTRUCTIONS TO ASSEMBLE THE TRAP TRIPOD
1. SCREW ONE EACH OF LOWER LEGS (J-2) INTO ONE EACH OF THE UPPER LEGS (J-1).
2. INSERT ONE EACH OF THE THREE LEG ASSEMBLIES (J-2 AND J-1) INTO THE LEG TOP PLATE SOCKETS (J-
4). CAREFULLY LINE UP THE GROOVE IN THE UPPER LEG (J-1) WITH THE THREADED HOLE IN THE LEG TOP
PLATE SOCKET AND TIGHTEN 8MM WING BOLT (J-3). REPEAT FOR EACH LEG.
3. PLACE THE PIVOT MOUNT TOP PLATE (J-5) ONTO THE LEG TOP PLATE (J-4) AND SECURE WITH WING NUTS
(J-6).
4. MAKE SURE ALL FASTENERS AND CONNECTIONS ARE SECURELY ATTACHED AND TIGHTENED.
TRAP TRIPOD ASSEMBLY AND PARTS LIST
J-1
3 EA.
J-2
3 EA.
J-3
3 EA.
J-4
1 EA.
J-5
1 EA.
J-6
3 EA.
J-7
3 EA.
J-5. PIVOT MOUNT TOP PLATE
J-1. UPPER LEGS
J-2. LOWER LEGS
J-4. LEG TOP PLATE
C. PIVOT MOUNT
J-3. 8 MM WING BOLT
J-6. 8 MM WING NUT
J. TRIPOD – 1 EA.
FIGURE 1
