manualshive.com logo in svg

Champion 2000 Series, Руководство по установке и эксплуатации

Поделиться
Скачать
Champion 2000 Series Скачать руководство пользователя страница 21

13

 

Cleaning

Cleaning and Maintenance

 

At the End of the Day

 

1.  Perform Steps 1-10 on the previous page.
2.  Remove the upper and lower rinse and wash spray arms.  The spray arms are interchangeable.
3.  Unscrew the upper and lower rinse arm spindles (A). Remove the rinse arm assemblies 
4.  Clean the final rinse arm nozzles using a small paper clip (B).
5.  Remove the rinse arm end plugs (C) 

if necessary,

 and flush the rinse arm with clean water.

6.  Re-install the rinse arm end plugs if they were removed.
7.  Remove the wash spray arms and flush with clean water.
8.  DO NOT USE STEEL WOOL TO CLEAN THE INTERIOR OF THE MACHINE.
9.  Contact the chemical supplier for de-liming if required (see next page).
10.  Wipe the interior and exterior of the machine with a soft cloth and a mild detergent.   

DO NOT HOSE THE EXTERIOR OF THE MACHINE WITH WATER.

11.  Reassemble the dishwasher and leave the door open to allow overnight drying.

Paper Clip

End

Plug

B

C

Wash Spray arm

Rinse Arm Spindle

D

A

Содержание 2000 Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды