Champion 18890, Руководство пользователя

Страница: 10 / 20

7
ENGLISH 18890
ASSEMbLy
Electric hoist is for indoor use only . Do not
install, operate or store outdoors .
NOTE
Grounding
Your electronic hoist must be properly connected
to an appropriate ground to help prevent electric
shock .
A ground terminal prong connected to the
power plug has been provided on the power
cord . If grounding of the hoist is not properly
understood, do not operate until grounding
has been explained . We strongly recommend
that you consult with a qualified electrician to
ensure compliance with local electrical codes if
grounding of the product is not fully understood .
Improper connection of the equipment or the
grounding conductor can result in electric shock .
If the cord, plug, or outlet look damaged do
not plug into a live terminal . Replace or fix any
damaged cords, prongs, or outlets before use .
Do not use any adapter or extension to connect
the plug to a power source or outlet that is not
grounded .
Failure to properly ground the electric hoist
can result in electric shock .
WARNING
Do not use if you have a pacemaker .
Electromagnetic fields in close proximity to a
pacemaker may cause interference or failure
of the pacemaker . People with pacemakers
should:
– Consult a doctor before use
– Never operate alone
– Inspect hoist power cord for proper
grounding connection and any signs of
possible electric shock hazards
DANGER
Make sure power cord and remote control cord
are always out of the way of the load, and are
never in a position to get frayed, pinched or
damaged .
CAUTION
Electronic Hoist Location
A proper hoist work area is recommended . The
hoist work area must be clean and well lighted .
The work area must not be accessible to children
or animals . Loads may be very heavy and property
damage, injury or death may occur if distractions
are present . Do not use to lift loads directly
overhead . Stand to the side while lifting . The hoist
should be located in an area that has enough
clearance on all sides of it, to avoid any accidental
breaking of the wire cable or dropping of the load .
Try to avoid the following dangers in any hoist work
area .
– Any oils, liquids or other slipping hazards on
the work area floor
– Confined spacing
– Distractions of any kind
– Dim or poor lighting
Extension Cord Information
If an extension cord must be used to power your
electric hoist, please refer the minimum gauge of
cord as it relates to feet needed .
Length Gauge
25 ft . (7 .6 m) 18 AWG Min .
50 ft . (15 .2 m) 16 AWG Min .
100 ft . (30 .5 m) 14 AWG Min .
Use only 3-prong grounding outlets and 3-wire
extension cords with 3-prong grounding plugs .
WARNING