background image

13

Operation

DWELL— 

Dwell pauses the dish rack in the wash zone to clean heavily soiled wares. 

TO WASH MULTIPLE DISH RACKS USING THE 'DWELL' FEATURE:

 

INSERT THE FIRST RACK AND TOUCH THE 'DWELL' BUTTON TO BEGIN.

 

WAIT FOR THE FIRST RACK TO PAUSE IN APPROXIMATELY 15 SECS. THEN    

 

INSERT ANOTHER RACK INTO THE MACHINE AND IMMEDIATELY TOUCH THE  

 

'DWELL' BUTTON. 

 

REPEAT THIS PROCESS UNTIL THE LAST DISH RACK OF HEAVILY SOILED WARES  

 

IS INSERTED INTO THE MACHINE. THE DWELL OPERATION WILL STOP AFTER  

 

THE LAST RACK EXITS THE MACHINE.

1

2

3

 

INSERT A DISH RACK OF HEAVILY SOILED DISHES INTO THE MACHINE.  'DWELL'    

 

APPEARS ON THE DISPLAY. 

 

 

Immediately touch the 'DWELL' button when it appears. It will turn red when   

 

touched indicating dwell is activated. 

The rack moves 4 secs., stops for 10 secs.,  

 

moves 4 secs., stops 10 secs., moves 4 secs., stops 10 secs. then resumes normal  

 

washing and then a final rinse. 

 

THE DWELL FUNCTION ENDS WHEN THE DISH RACK EXITS THE MACHINE.

1

2

3

Fig. 19

DWELL— 

Wash delay for multiple dish racks.

Содержание 100HD PRO















































Отзывы: