100230 - 7500W DUAL FUEL ELECTRIC START GENERATOR
CONTROLS AND FEATURES
13
Control Panel
1.
Fuel Selector
– Used to select and turn on gasoline or
propane (LPG) fuel source.
2.
LPG Inlet
– Used to connect LPG fuel source to generator.
3.
Ignition Switch
– Used to START or STOP the generator.
When operating by propane, this switch will NOT stop the
engine.
4.
Intelligauge
– Three mode digital meter for displaying total
run time, voltage and hertz.
5.
Battery Switch
– Enables/disables starting electrically.
6.
Ground Terminal
– Consult an electrician for local grounding
regulations.
7.
Circuit Breakers (Flip Reset)
– Protects the generator
against electrical overloads.
8.
Circuit Breakers (Push Reset)
– Protects the generator
against electrical overloads.
RECEPTACLES
A
W
120V AC, 30A Locking (NEMA L5-30R)
May be used to supply electrical power for
operation of 120 Volt AC, 30 Amp, single phase,
60 Hz electrical loads.
B
Y
120/240V AC, 30A Locking (NEMA L14-30R)
May be used to supply electrical power for
operation of 120/240 Volt AC, 30 Amp, single
phase, 60 Hz electrical loads.
C
A
(4×) 120V AC, 20A (NEMA 5-20R)
May be used to supply electrical power for
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
1
2
3
4
5
8
7
6
A
b
C
