Champion Power Equipment C41155, Руководство оператора

Страница: 8 / 14

8
SERVICE INFORMATION
A = Intermittent use (less than 1 hour) or colder temperatures, below 60°F
B = Medium use (less than 3 hours) or seasonal temperatures 50°F 80°F
C = Extreme use (continuous use) or hot climates 80°F-100°F
Spark Plug, NGK or equivalent
Spark Plug Gap
Valve Clearance, Cold A B6ES B B7ES C B8ES
0.70 / 0.80mm (.028 / .031 in.)
Intake 0.13 / 0.17mm (.005 / .007 in.)
Exhaust 0.18 / 0.22mm (.007 / .009 in.)
ADDING / CHECKING OIL LEVEL
1)Remove oil fill cap / dipstick to add oil
2)Add 1.6 qts. (1.1 L) oil and replace cap / dipstick
3)To check oil level - remove cap/dipstick and wipe it clean. Insert
cap/dipstick into the filler, but do NOT screw it in. Oil should
appear on dipstick.
4)If more oil is required add slowly
5)Oil should be filled at least to the bottom of the threads but not above the
top of the threads when on a level surface.
MAX IMUM FILL
MIN IMUM FILL
DRAIN PLUG
DIP STICK
CAUTION
This engine is equipped with a “low oil shut-off” and the engine will stop when engine oil falls below the minimum safe
level. Add oil immediately then restart engine.
CHECK ENGINE OIL LEVEL DAILY AND ADD AS NEEDED!
REGULAR SERVICE PERIOD : Perform at every indicated month or operating hour interval, whichever comes first.
EACH USE
FIRST
MONTH OR
5 HOURS
FIRST 10
HOURS
EVERY
3 MONTHS
OR 50 HOURS
EVERY
6 MONTHS
OR 100 HRS
ITEM
Check level
Change
Check
Clean
Clean
Clean-Readjust
Check-Readjust
Clean
Clean
Replace if necessary Engine Oil
Air Cleaner
Sediment cup
Spark plug
Valve clearence*
Spark Arrester
Fuel tank and filter*
Fuel Line
Every 3 years
°F-20 0 20 40 60 80 100 120
10W-30
5W-30
30
MAINTENANCE SCHEDULE:
* Recommended for experienced owner or service center.
• Tampering with the factory set governor could void your warranty.
• Improper maintenance will void your warranty.