200990 - 4500W WIRELESS REMOTE START INVERTER GENERATOR
OPERATION
26
4. Push the choke button one time to set the choke to the
“CHOKE” position. Choke button will illuminate when in
“CHOKE” position.
5. Pull the recoil cord slowly until resistance is felt and then pull
rapidly.
6. Do not over-choke. As soon as engine starts, push the choke
button one time to set the choke to the “RUN” position. Choke
button will no longer be illuminated when in “RUN” position.
NOTICE
If the engine starts but does not run make certain that the
generator is on a flat, level surface. The engine is equipped
with a low oil sensor that will prevent the engine from running
when the oil level falls below a critical threshold.
Manual Choke Start
If the battery is dead or not able to produce enough current to
power the push button choke, the choke itself can be operated
manually to help start the engine. To manually choke and start the
generator, follow these steps:
1. Loosen the two screws and remove the maintenance cover.
2. Locate the yellow manual choke lever.
3. Turn the choke lever to the “CHOKE” (right) position.
4. Turn the EZ Start Dial to the “ON” position.
