22
5.Change to multifuction display area
Short press
6.Setting parameter
Long press
+
will be into parameter setting page
，
the
parameter setting can be including
，
Rim size(inch),number of magnet steel
，
brightness of the display, under voltage
point and etc.
（
setting
：
P01-P14
）；
In the page of parameter setting
，
short press
+parameter
，
or short press
-parameter
，
parameter will be shining after setting
，
after choose the
parameter
，
4.
a.Long press
to save, shining will be stop.
b.short press
to change to next parameter and save the last parameter
23
at the same time.
2. Press
+
，
quit setting and save
，
If you do not press
，
it will
quit and save automatic after 10S.
Marks
：
Because of the updating of the products, there may be some difference
between the product you get and the manual. But it will not affect your using.
6. Recommended safety instructions and maintenance
6.1 Recommended safety instructions
Helmet
Use a bicycle helmet.
Tires
Inspect the abrasion of your tires on a regular period and check the tire pressure at least
once a month.
Reflector
Please make sure that the position of reflectors and lamps are not obscured when
luggage is attached to the luggage carrier
Battery
Cf. Chapter. 4.7
6.2 Maintenance
Caution:
Bike maintenance and repairing needs more skills and professional tools. Do not repair
your bike or change any settings by yourself. Contact your dealer to do that. Any bad
adjustment or repairing can damage the bike and lead to accidents. Using the replacing
parts from your dealer only.
Cleaning
Always remove the battery when cleaning. Use soapy water or water mixed with a
gentle detergent, and then rinse with clean water.
Make sure to keep the controller dry.
Do not use a high-pressure washer!
