
Slide the shorter pole (G) (figure 1) through the plastic sheeting box and install onto the right side of the lower rear
tray on the back of the masker. Place the top plate (E) (figure 2) on the top of the box. Attach post (K) to the middle
brace (I) (figure 3). Attach the pole (G) to the post (K) (figure 4)
I n s t r u c t i o n s
8.
Attach (3) blades (N) (figure 1), (4) tape hubs (O) (figure 2) and locking collars, springs and washers (figure 3)
11.
Figure 1
Figure 2
Figure 3
Figure 4
Attach upper brace (J). This brace bolts to the blade
post (F) on the left side and post (K) on the right side
9.
Upper
Brace J
Attach the longer pole (G) to the left side of the lower
rear tray on the back of the masker (figure 1) and
then attach post (L) to the upper brace (J) and to the
pole (G) (figure 2)
10.
Post L
Figure 1
Figure 2
Tape Hub Locations
Figure 1
Figure 2
Figure 3
Just load your paper rolls and tape, and your Champ Deluxe Mobile Masker is ready to be used!