Operation
Portable Wireless IrDA Printer
Set-Up Mode
The printer has been set up at the factory with the following default parameters:
Baud rate
: 9600 bps
Handshaking : DTR
Country :
U.S.A.
Print mode
: Text (upright)
Paper
: Normal paper
Density :
100%
IrDA :
IrDA-SIR
If necessary, the default parameters can be changed as follows:
1. With the printer initially switched OFF, press and hold down the SEL
pushbutton; and then switch ON the printer.
2. The printer now goes into its set-up mode as indicated by the red LED
flashing. At this time all of the printer’s current parameter settings are printed,
followed by the first parameter that can be modified.
Note:
If no button is pressed within 15 seconds, the set-up mode is
automatically terminated without changing the original parameters.
3. IrDA is first parameter printed. Pressing the FEED button causes the value of
that parameter to change in the sequence shown in the following table.
FEED Button
SEL Button
300~115,200
Baud rate
Handshaking
DTR, X-on/X-off
Country
U.S.A., Korea, Cyrillic, Denmark2, Norway, Japanese, Spain,
Italy, Sweden, Denmark1, U.K., Germany, France
Text(upright), Data(inverted)
Print mode
Paper
Normal paper, Reprint paper
Density
50~150% in 5% steps
IrDA
IrDA-Off, IrDA-SIR, HP-Ir
６
Instruction NewHany
