Chameleon Antenna CHA MPAS 2.0 Скачать руководство пользователя страница 24

Страница: 24 / 25

CHA MPAS 2.0

Page 24

Figure 15. End-Fed Inverted “V” Far Field Plot 14 MHz.

Accessories

The following accessories are available for purchase from Chameleon Antenna

. Please contact us at

[email protected]

for current prices and availability.



Counterpoise Kit.

The CHA COUNTERPOISE KIT is ideal for portable antenna deployment. The system will

create the ground-plane needed to any vertical antennas and will also play the role of guy wires. It
contains four 25-foot wire radials secured around plastic wire winders and four steel tent stakes.



Capacity Hat.

The CHA CAP-HAT has been designed to enhance the radiation of any screw together HF

antenna.



50’ Paracord and Line Winder Assembly.

One assembly is recommended to enable installation of the

CHA MPAS wire configurations.



Guying System.

The Universal Guying System (CHA UGS) is recommended to stabilize the assembled CHA

MIL WHIP 2.0 and CHA MIL EXT 2.0 vertical during high winds.



Clamp Mount.

The CHA JAW MOUNT has been assembled to offer portable antenna versatility for

Chameleon Antenna owners. The mount orientation can easily be changed with a simple 3/16 Allen Key.

Recommended non-supplied accessories:



Wide range antenna tuner or coupler.

(Required for most configurations)



Paracord or similar low-stretch synthetic line.

(Required for wire antenna configurations)



Tent stake.



Plastic mallet.



Flashlight.



Multi-tool.



Throwing weight and string.

Содержание CHA MPAS 2.0


























Результаты поиска

Содержание CHA MPAS 2.0

Отзывы:

Бренды по названию

Популярные бренды

Chameleon Antenna CHA MPAS 2.0, Руководство оператора

Результаты поиска

Содержание CHA MPAS 2.0

Отзывы:

Бренды по названию

Популярные бренды