6
201102-01
Note:
When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
OPERATION
MANUAL MODE
... back on.
1 Second
OFF
then
...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
SPECIFICATIONS
Range .................................................Up to 9.1 m (30 ft.) [varies with surrounding temperature]
Sensing Angle.....................................Up to 180°
Electrical Load ...................................See label on fixture for maximum wattage rating
Bulb Type ...........................................E27 Screw Base, Type “A”
Sensor Capacity ..................................Up to 360 Watts (1.5A) maximum tungsten incandescent
Power Requirements ...........................230 VAC, 50 Hz
Operating Modes ...............................TEST, AUTO, and MANUAL MODE
ON-Timer ..........................................1, 5, 10 minutes
Test Timer ..........................................5 Seconds
Manual Mode Timer ..........................Dusk-to-Dawn
Ingress Protection ...............................IP23
MANUAL MODE
AUTO
TEST
ON-TIME Switch at 1, 5,
or 10 minutes
MODE SWITCHING SUMMARY
Flip light switch
off for one second
then back on*
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
The Chamberlain Group reserves the right to discontinue products and to change specifications at
any time without incurring any obligation to incorporate new features in products previously sold.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10
Minutes
x
Manual
To Dawn*
x
