Chamberlain MH, Руководство по установке

Страница: 4 / 32

4
10.88"
15.78"
6.34" 6.34"
12.69"
6.13"
3.63"
9.19"
18.50"
2.91"
7.00"
14.75"
A A
A
A
6.50"
B
B
B
B
WEIGHTS AND DIMENSIONS
HANGING WEIGHT: 60-70 LBS. (27.22-31.75 kg)
6.34"
(16.1 cm)
Hand Chain Wheel
present with model
MH only.
7"
(17.78 cm)
12.69"
(32.23 cm)
O P E R A T O R S P E C I F I C A T I O N S
MOTOR
TYPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limited duty
HORSEPOWER: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 HP
VOLTAGE: . . . . . . . . . . . . . . . . . . . . 115Vac, Single Phase, 60Hz
FULL LOAD AMPS: . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 Amps
ELECTRICAL
OPERATOR VOLTAGE: . . . . . . . . . 115Vac, Single Phase, 60 Hz
WIRING TYPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . C2 (Standard)
B2 Configurable (See Basic Programming Section)
CONTROL WIRING: . . . . . . . . . . . . . . . . . . . . . . . . . 16-22 AWG
ENVIRONMENTAL
LOCATION: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Indoor, dry location
OPERATING TEMPERATURE: . . . . . . . . -4˚ F to +122˚ F (-20C˚ to + 50˚C)
O P E R A T O R D I M E N S I O N S
MOUNTING DIMENSIONS
A - Wall Mounting
B - Bracket Mounting (rolling door)
6.34"
(16.1 cm)
10.88" (27.64 cm)
15.78"
(40.03 cm)
18.5"
(47 cm)
2.91" (7.39 cm)
3.63"
(9.22 cm)
6.13"
(15.57 cm)
9.19"
(23.34 cm)
6.34"
(16.51 cm)
7"
(17.78 cm)
14.75"
(37.47 cm)
SAFETY
DISCONNECT:
MH
. . . . . . . . . . . . . . . . . . . . . . . . . Floor level chain hoist for
emergency manual chain hoist operation.
MJ . . . . . . . . . . . . . . . . . . . . . . . . . . Floor level disconnect for
emergency manual operation.
MHS . . . . . . . . . . . . . . . . . . . Both disconnects described above.
ENTRAPMENT PROTECTION: . . . . . Supports both monitored
and non-monitored safety devices including LiftMaster CPS
photo-eyes and industry standard sensing edges.
MECHANICAL
DOOR SPEED: . . . . . . . . . . . .Approximately 9" (23 cm) / second
depending on door setup
OUTPUT FORCE: . . . . . . . . . . . . . . . . . . . . . . . . .125 ft. lbs/ sec.
OUTPUT RPM:
MJ
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 RPM
MH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 RPM
MHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38.6 RPM
LIMIT ADJUST: . . . . . . . . . . Fully adjustable up to 14' door Max
DUTY: . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Cycles per Hour Max
50 Cycles per Day Max
DRIVE TRAIN: . . . . . . . . . . . . . . . . . . Maintenance Free Bearings
FINISH: . . . . . . . . . . . Powder coated, Corrosion Resistant Steel