LOCATING THE LEARN BUTTON
NOTE: When programming a Merlin or Chamberlain S2.0 opener
follow the below steps:
1. Press & release the LEARN button on the opener.
2. Press & release the remote button you wish to program. The code has
been learnt and the next press of the remote button should activate the door.
When programming two doors at the one site, we recommend programming
the TOP button first. This is to avoid accidentally operating a
preprogrammed door. Alternatively turn off any preprogrammed doors.
The Bottom Button is the PROGRAMMING button and is the only button
that can commence the programming sequence, irrespective of which button
you choose to control the door.
The operate buttons require a firm press, this is to eliminate accidental
activation due to mishandling the remote.
This remote only operates with 433.92MHz radio control systems.
PROGRAMMING TIPS
de de
Learn Button
Indicator LED
DN UP P
S
1
2
3
Learn Button
Sectional & Tilt Door Openers
Roller Door Openers
3
In order to program the Universal Remote, the
LEARN
button on the
garage door opener must be located. This will need to be activated
during the programming sequence.
The
LEARN
button may also be labelled,
CODE, CODE SET,
DOOR CODE, RADIO SET, ‘S’
, or similar.
Refer to your Opener Owner’s Manual for more information.
Here are examples of the
LEARN
button position
