3
Door Strike or Magnetic Lock
Step 1:
Connect relays (as shown in
Setup: Relay
Outputs
and the charts below).
NOTE:
If a Door Strike is used, a separate power
supply is required.
If a Magnetic Lock is used, use the Normally Closed
connections (see below).
1
3
2
4
5
6
7
8
9 10 11 12
N/O
COM N/C
+
-
-
+
DC
AC
+
-
13
N/O
COM
N/C
1
3
2
4
5
6
7
8
9 10 11 12
N/O
COM N/C
+
-
-
+
DC
AC
+
-
13
N/O
COM
N/C
GCU
GCU
Program Accessories
Single Pushbutton Control (WPB1LM)
Step 1:
Connect relays (as shown in
Setup: Relay
Outputs
).
Step 2:
Connect power (as shown in
Setup: Power
Connections
).
Step 3:
Press and Release the
Learn button on the Pushbutton
Control.
The Receiver will buzz and the LED
will blink 3 times indicating
programming is successful.
If the memory in the Pushbutton Control needs to be
cleared, press the Learn button until a tone is heard.
Refer to the Pushbutton Control manual for mounting
and operating instructions.
Gate Access Panel (GAPLM)/Keypad
Step 1:
Connect relays (as shown in
Setup: Relay
Outputs
).
Step 2:
Connect power (as shown in
Setup: Power
Connections
).
Step 3:
On the GAPLM or Keypad, enter Master PIN
Number, followed by the Receiver Identity (1-4) as
determined in
Setup: Additional Receivers
.
The Receiver will buzz and the LED will blink 3 times
indicating programming is successful.
Refer to the GAPLM/Keypad manual for mounting
and operating instructions.
1 2
3
4
5
6
7
8
9
*
0
#
Cancel
OR
Installation
Step 1:
Reattach cover with screw.
Step 2:
Mount the Receiver with
the Terminal Block at the bottom
and the antenna hanging straight
down.
NOTE:
Metal surfaces can shorten the
range of the Receivers. If mounting on a metal
surface and long range is required, use a
non-metallic spacer to move the Receiver away from
the metal surface.
1 2 3 4 5 6 7 8 9 10 11 12 13
Optional external power
input 10-24 Vac or DC
Optional external power
input 10-24 Vac or DC
Door
Strike
Transfomer/
Power Supply
Door Strike- Normally Open (N/O) Connection
Transfomer/
Power Supply
Magnetic
Lock
Magnetic Lock- Normally Closed (N/C) Connection
Relay 2
Relay 1
Relay 2
Relay 1
