Chamberlain LiftMaster TAC1, Инструкция по установке и программированию

Страница: 14 / 20

14
The unit’s Master Code is for owner/administrator level commands. The User Codes allow users to activate and
latch relays 1 and 2 and to transmit radio commands on channels one and two.
NOTE: The User Code cannot be the same as the Master Code.
PROGRAMMING
>> CODE SETUP AND CODE OPERATION
TRIGGER RELAY 1 (ONLY)
Enter the Master Code:
? ? ? ?
NOTE: Requires Relay 2 be in Independent Mode.
ENABLE VACATION (LOCK DOWN) MODE
Locks the system from all User Code activity.
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code: 5 2
DISABLE VACATION (LOCK DOWN) MODE
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code:
5 3
TRIGGER RELAY 1 AND CHANNEL 1
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code:
1
TRIGGER PROGRAMMED RELAY/CHANNEL FOR USER CODE
Enter the User Code: ? ? ? ? The Relay/Channel
will activate.
TRIGGER RELAY 2 AND CHANNEL 2
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code:
2
CODE SETUP
CODE OPERATION
MASTER CODE OPERATIONS
USER CODE OPERATIONS
ENTER A TEMPORARY (1 SHOT) USER CODE NUMBER
The TAC1 holds 1 temporary User Code.
1. Enter the Master Code: ? ? ? ?
2. Enter the Program Code:
5 1
The unit will beep.
3. Enter the Temporary User Code:
ENGAGE PARTY MODE (RELAY 1)
Party Mode will latch relay and trigger corresponding
channel.
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code: 5 4
To disengage party mode: Enter a valid code into the TAC1
keypad or enter “#9” into the local telephone.
ENGAGE PARTY MODE (RELAY 2)
Party Mode will latch relay and trigger corresponding
channel.
1. Enter the Master Code:
? ? ? ?
2. Enter the Program Code:
5 6
To disengage party mode: Enter a valid code into the TAC1
keypad or enter “#5” into the local telephone.
ENTER A USER CODE NUMBERS
1. Enter the Master Code:
? ? ? ?
The unit will
beep.
2. Enter the Program Code:
9
The unit will beep.
3. Enter New User Code:
4. Enter the Relay/Channel for the Code to control:
1
or
2
or no button is pressed.
NOTE: If no button is pressed in step 4, both
relays/channels will activate simultaneously.
DELETE USER CODE NUMBERS
1. Enter the Master Code:
? ? ? ?
The unit will
beep.
2. Enter the Program Code:
7
The unit will beep.
3. Enter User Code to be deleted:
8 9 7
0
2 3 1
5 6 4