POST MOUNT
CONCRETE PAD MOUNT
1
1
2
4
2
3
3
Install the posts.
Install the electrical conduit.
Remove the bolts (4) and the top plate from the mounting stand.
Position the top plate over the square posts. The top plate must be level.
Fasten the top plate to the posts by welding completely around the posts.
Fasten the operator to the top plate with appropriate hardware.
Lay out the concrete pad.
Install the electrical conduit.
Pour a concrete pad (reinforced concrete is recommended). The concrete pad should
be 6 inches above the ground and deeper than the frost line.
Attach the mounting stand to the concrete pad with appropriate hardware.
Attach the operator to the mounting stand with appropriate hardware.
4
5
6
4
5
3
5
6
3
2
4 Concrete Anchors
1/2" x 3 1/2"
Below the frost line.
Check all local codes.
6" Above Ground
24"
(61 cm)
24"
(61 cm)
1
4
5
2
1
01-35732
©2009 The Chamberlain Group, Inc. - All Rights Reserved
