Chamberlain Garos CS 300, Руководство по эксплуатации

Страница: 40 / 156

– CS 300 Gate Controls / Rev. 5.3 CS 300 Gate Controls / Rev. 5.3 -
Function Description Setting options Factory setting
Pressure
sensor TEST ON: PS testing is active
OFF: PS testing is inactive
The testing of the PS switch takes place in the CLOSE end position. For this, the PS
contact must be temporarily broken when the gate lowers to rest on the ground.
ON
OFF OFF
DELAY-OPEN ON: Forewarning before opening
OFF: Immediate opening
ON
OFF OFF
FINE-OPEN Fine adjustment of OPEN end position 0 – 8190 4050
FINE-CLOSE Fine adjustment of CLOSE end position 0 – 8190 3950
BES-OPEN Setting the before-end position switch point for the OPEN direction (PART-OPEN) 0 – 8190 4000
BES-CLOSE Setting the before-end position switch point for the CLOSE direction 0 – 8190 4000
ROT. FIELD C: clockwise rotating field
A: anti-clockwise rotating field
This setting may only be altered in the case of a special customised drive installation!
C
A C
REVERSE
OFF The point where the reversing switch is activated before the CLOSE end position is
reached. 10 – 250 50
POWER The power is displayed during the opening movement.
If the power monitoring facility is activated, a value must be set, which is lower than
the lowest value displayed during opening. The larger the difference, in comparison to
the lowest value displayed, the less sensitive the reaction of the power monitoring.
The power monitoring facility is only activated if the value is set to be > 0.
0 – 999 0
AUTO-
LEVEL ON: Align with ground, ON
OFF: Align with ground, OFF
ON
OFF OFF
SELF LOCK. MOD1: Automatic operation
MOD2: Manual operation for OPEN and CLOSE
MOD3: Manual operation for CLOSE
MOD1 - MOD3 MOD1
SU/WI MOD1: PART-OPEN button at terminal X4 (9 + 10)
MOD2: PART-OPEN selector switch at terminal X4 (9 + 10)
When the selector switch is closed, all OPEN commands go to the before-
end switch OPEN
MOD1
MOD2 MOD1