7
If opener does not function, repeat programming.
Press and release the Program/Set
button and the long LED will flash
PURPLE.
On the
CLICKER
®
keypad
, press
and release
0
again. Both LEDs on
the garage door opener will light
up BLUE.
On the
Genie
®
remote control
,
press and release the button that is
already programmed to the garage
door opener. Both LEDs will flash
PURPLE.
On the
CLICKER
®
keypad
, enter
the
PIN
from step 1, and press
and release the
0
key. Both LEDs
on the garage door opener will
light up PURPLE.
On the
CLICKER
®
keypad
,
press and release
0
again.
This will activate the garage
door opener and
programming is complete.
7
10
8
9
11
To test and use, wait 30 seconds, then enter
your
PIN
and press the
0
key.
12
