© 2002, The Chamberlain Group, Inc.
114A2717
All Rights Reserved
Printed in Mexico
Resetting the Right Push Button Back to
Security
✚
as Follows:
Push and hold both buttons while observing
the small yellow indicator light. Hold both
buttons for ten seconds until the yellow
indicator light stops blinking. The remote has
defaulted to one of six randomly
preprogrammed Security
✚
settings.
When Several Remotes Operate
One Device:
To match the 972MOM to another CGI manufactured
remote’s code (Remote Control X):
1. Begin by having both the 972MOM and Remote
Control X available.
2.
Press and hold both buttons
on
the 972MOM until the yellow
indicator light, visible on the
bottom through a small hole,
begins to blink. It will blink for 30
seconds; during this time it is in
the learn or training mode, and
the buttons can be released.
3. While it is in learn mode, hold
Remote Control X, another CGI
fixed or billion-code transmitter,
back to back with FCC labels
touching as illustrated.
4.
Press and hold the Remote
Control X push button
as you
slowly slide the remotes across
each other until the 972MOM
indicator light blinks very rapidly,
indicating it has learned the
code. (If Remote Control X is
also a 972MOM, you must press
and hold its
right
push button.)
5. The right button is now sending
the same identical coded signal
as Remote Control X. This code
will remain inside the 972MOM
until replaced with another new
code by repeating steps 1-4
above, or by resetting
to Security
✚
.
FCC Label
Remote Control X
Yellow
Indicator
Light
Yellow
Indicator
Light
