14
MyQ
®
LighT COnTROLS
Programming to a MyQ
®
Light Control
The images throughout this manual are for reference only and your product may look different.
Press and release the LEARN button on the module (the
LED on the module will light).
Button
1
Plug the lamp into the module and plug the module
into an electrical outlet (the LED on the module will
flash).
NOTE
: Make sure the lamp is switched ON.
2
If the lamp is not ON, press and release the Power button
on the module to turn the lamp ON.
3
4
Press the button on the remote control.
5
The lamp’s light bulb will blink and the LED on the
module will turn OFF when the device has been
programmed.
LED
