Chamberlain 1425E Скачать руководство пользователя страница 33

Страница: 33 / 80

To Open the Door Manually

The door should be fully closed if
possible. Pull down on the
emergency release handle and lift
the door manually. To reconnect
the door to the opener, press the
door control button.

The

lockout feature

prevents the

trolley from reconnecting
automatically, Pull the emergency
release handle down and back
(toward the opener). The door can
then be raised and lowered
manually as often as necessary.
To disengage the lockout feature,
pull the handle straight down. The
trolley will reconnect on the
next UP or DOWN operation.

To prevent possible SERIOUS INJURY or DEATH from a

falling garage door:

• If possible, use emergency release handle to disengage

trolley ONLY when garage door is CLOSED. Weak or broken
springs or unbalanced door could result in an open door
falling rapidly and/or unexpectedly.

• NEVER use emergency release handle unless garage

doorway is clear of persons and obstructions.

• NEVER use handle to pull door open or closed. If rope knot

becomes untied, you could fall.

Using the Wall-Mounted Door Control

THE MULTI-FUNCTION DOOR CONTROL

Press the push bar to open or close the
door. Press again to reverse the door
during the closing cycle or to stop the
door while it's opening.

Light feature

Press the Light button to turn the
opener light on or off. It will not control the opener lights
when the door is in motion. If you turn it on and then
activate the opener, the light will remain on for 4-1/2
minutes. Press again to turn it off sooner.

Lock feature

Designed to prevent operation of the door from hand-held
remote controls. However, the door will open and close
from the Door Control, the Outside Keylock and the
Keyless Entry Accessories.
To activate, press and hold the Lock button for 2 seconds.
The push bar light will flash as long as the Lock feature
is on.
To turn off, press and hold the Lock button again for
2 seconds.The push bar light will stop flashing. The Lock
feature will also turn off whenever the “Learn” button on
the motor unit panel is activated.

Additional features when used with the 3-Button
hand-held remote

A) To control the opener lights:

In addition to operating the door, you may program the
remote to operate the lights.
1. With the door closed, press and hold a small remote

button that you want to control the light.

2. Press and hold the Light button on the door control.
3. While holding the Light button, press and hold the Lock

button on the door control.

4. After the opener lights flash, release all buttons.

B) To operate one door using all three buttons on the

hand-held remote:

You may program the remote to open the door with the
large button, close it with the middle button, and stop the
door’s movement with the third button.

NOTE:

If remote is already programmed, you must first

erase all codes. See Programming.

1. With the door closed, press and hold the large remote

push button.

2. Press and hold the Lock button on the door control

for a minimum of one second before proceeding to next
step.

3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.

LOCK

LIGHT

Lighted
Push Button

Lock
Button