___________________________________________________________________________________________________
I-ARRI-01.doc
Issue 03 25
th
April 2016
5
IOM
–
ARRAN LED FLOODLIGHT (IND)
Directions for Installation of Accessories
Note: Reflector and Guard cannot be used simultaneously.
WARNING: Ensure the supply circuit is off before starting installation.
To install reflector, carefully remove the 7 screws provided in housing that align with the locations of the ho les on the
reflector and retain the screws. Place the reflector into position, lining up the holes in the reflector with the holes on th e
lens housing. Reinstall the removed 7 screws into the existing hole location, and tighten to secure. CAUTION - All screws
must be properly installed to maintain the integrity of the lens gasket seal.
To install lens assembly guard, verify that the luminaire is completely assembled. Install lens guard on lens assembly by
hooking the gu
ard’s end tabs under the luminaire housing's end tabs. Verify a tight attachment.
SCREWS
HOOK WIRE
END TABS
UNDER
HOUSING
END TABS
