Challenger_SLFLO80_100_150_230_300_460_600_Instructions_Rev01
Maintenance
Repairs should only be carried out by a suitably qualified person.
Regular cleaning of luminaires should be carried out at regular intervals not only to ensure good optical
performance but also ensure that dirt does not accumulate to such an extent as to impair the electrical or
thermal safety of the fitting. This should be done with the luminaire switched off/isolated and a soft
damp cloth should be used, do not use any chemicals or abrasives.
Light Source Maintenance:
the light source of this luminaire is not replaceable; in case the light source
need to be replaced (e.g. at the end of its life), the whole luminaire shall be replaced.
Warranty:
This product is covered by an extended warranty for 5 years from date of purchase.
The extended warranty is available for installations in the UK or Ireland by a competent person in
accordance with the current building and IEE wiring regulations.
If the defective product is no longer available then Challenger may provide alternatives of similar
specification and quality.
The ambient temperatures and environment and voltage range according to manufacturer specifications
are not exceeded
The product is not exposed to any adverse mechanical stresses or impact
For full terms and conditions in regards to our extended warranty please refer to the website.
Due to our policy of continuous improvement we reserve the right to change specification without prior notice.
Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no
responsibility can be accepted by Challenger for any misinterpretation of these instructions.
CHALLENGER SECURITY PRODUCTS
10 Sandersons Way,
Blackpool, FY4 4NB
Email:
Web:
www.challenger.co.uk
