Challenger RB452, Руководство по обслуживанию, Страница: 15 / 31

79033773 A Rev. 01-11
General Information
INTRODUCTION
The operation and maintenance instructions included in
this manual are assembled from field testing and other
data. The information is written for general conditions.
Make adjustments as necessary for specific conditions.
Right-hand and left-hand, as used in this manual, is
determined by facing the direction the machine will travel
when in use.
Units of Measurement
Measurements are given in metric units of measurement
followed by the equivalent in U.S. units. Hardware sizes
are given in millimeters for metric hardware and inches for
U.S. hardware.
Replacement Parts
To receive prompt efficient service, always remember to
give the dealer the following information:
• Correct part description or part number.
• Model number of your machine.
• Serial number of your machine.
Serial Number Plate Location
FIG. 19: The serial number plate (1) is located on the
inside of the left-hand side panel.
Machine Identification
Machine Model No.: ____________________________
Machine Serial No.: ____________________________
Date of Delivery: _______________________________
Dealer Name and Address: ______________________
____________________________________________
____________________________________________
____________________________________________
Dealer's Telephone No.: _________________________
Dealer's Fax No.: ______________________________
FIG. 19
1
KC03034
Find manuals at http://best-manuals.com/search?&s=CHAL-79033773A