QAD#IM6010 RevD 11.01.19
Close Cam Setting
Close Limit Switch
Close limit Switch Cam (clockwise)
2mm Hexagon socket screw Key
OPERATION INSTRUCTION
Electrical Connections and Preliminary Test
Loosen the screws on the actuator cover and lift it off
Make sure that the power supply voltage is in accordance with the data on the actuator name plate
Connect wires according to the enclosed wiring diagram
Move the valve manually to a half-open position, operate and electrical opening and check that the motor rotates in the right
direction
Standard units are counter-clockwise to open set
Test the actuator and check the limit switches work correctly
Check all the cable glands are correctly tightened, applicable cable glands should be selected to be meet the applications
condition. Over the grade IP67 of cable gland recommended in potentially explosive atmospheres.
Mount cover and tighten cover bolts
9
