Challenge Xtreme PRT1204.1, Оригинальное руководство пользователя

Страница: 9 / 16

HELPLINE NO 08448012949
9
OrIgINaL INstructIONs
4. aDJustINg DEPtH Of cut
(see fig. f-H)
The depth of cut is the distance between the
Triple Depth Stop (10) and the Depth Stop (13).
Router bits vary in depth, the Triple Depth Stop
allows for this with its three positions. Use one of
the two following methods:
Method 1: using a piece of wood
Fit the router bit, loosen the Depth Stop (13)
Fixing Screw, pull the Plunge Lock Lever (12)
up and press the router down until it comes into
contact with the workpiece. Lock the router into
this position by pushing down the Plunge Lock
Lever .
Lift up the Depth Stop and insert a piece of wood
the same thickness as the depth of cut between
the Depth Stop and Triple Depth Stop (10).
Tighten the Depth Stop Fixing Screw (11) and
release the Plunge Lock Lever to return the router
back to its original position. The depth of cut is
now set.
Method 2: using the scale
Fit the router bit, loosen the Depth Stop (13)
Fixing Screw and release the Plunge Lock Lever.
Press the router down until it contacts the
workpiece to this position with the Plunge Lock
Lever. The scale on the depth now shows the
starting position. Note the starting position will
vary depending on the bit used.
Next add the required depth of the cut to the
starting position, i.e.: if the scale shows 20mm
and you require a cut of 10mm, then the correct
adjustment on the scale is 20+10=30mm. If the
scale shows 38mm and the required cut is 6mm
in depth, the adjustment on the scale will be
38+6=44mm.
Now move the Depth Stop to the calculated
number, and lock the bar with the Fixing Screw.
Release the Plunge Lock Lever so that the router
will return to its original position.
5. MarkINg fINE aDJustMENts tO
tHE cuttINg DEPtH (see fig. I, J)
To make fine adjustments, turn the Triple Depth
Stop by loosening the centre screw, lift the stop
and turn to a suitable length screw, release stop
and tighten centre screw.
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
Fig. I
Fig. J
Fig. K
Fig. L
Fig. M
Fig. N
Fig. O
Fig. P
Fig. I
Fig. J
Fig. K
Fig. L
Fig. M
Fig. N
Fig. O
Fig. P