background image

HELPLINE NO 03448012949

5

ORIGINAL INSTRUCTIONS

TECHNICAL DATA

Type Designation:  

PBP180 (PBP-designation of machinery, representative of polisher)

Rated voltage: 

230-240V~50Hz

Rated input power: 

600W

No-load speed: 

1500-6800/min

Max. pad diameter: 

180mm

Protection class: 

/II

Weight: 

2.46kg

NOISE AND VIBRATION DATA

A weighted sound pressure 

80dB(A)

A weighted sound power 

91dB(A)

K

PA

&K

WA

 3dB(A)

Wear ear protection when sound pressure is over  

80dB(A) 

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a

h

 = 2.3m/s

2

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for comparing one tool with another, and may also be 

used in a preliminary assessment of exposure.

WARNING: 

The vibration emission value during actual use of the power tool can differ from 

the declared value depending on the ways in which the tool is used dependant on the following 

examples and other variations on how the tool is used:

How the tool is used and the materials being cut or drilled.

The tool being in good condition and well maintained. 

To use the correct accessory for the tool and ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any anti vibration accessories are used.

And the tool is being used as intended by its design and these instructions. 

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING: 

To be accurate, an estimation of exposure level in the actual conditions of use should 

also take account of all parts of the operating cycle such as the times when the tool is switched 

off and when it is running idle but not actually doing the job. This may significantly reduce the exposure 

level over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).

If the tool is to be used regularly then invest in anti vibration accessories.

Содержание PBP180













Отзывы: