Challenge Xtreme CSD36L.1, Оригинальное руководство пользователя

Страница: 9 / 12

HELPLINE NO 08448012949
9
OrIgINaL INstructIONs
Fig.B
2. FIttINg aND rEMOvINg sOcKEts
(sOLD sEParatELY)
To use the socket, you can simply refer part
of ” fitting and removing Bits”.
Just insert the socket into adaptor and
then put them together into bit holder. (See
Fig.C)
Fig.C
3. FOrWarD / rEvErsE sWItcH (see
Fig.D)
For drilling and screw driving use forward
rotation marked “►” (lever is moved to
the left). Only use reverse rotation marked
“◄” (lever is moved to the right) to remove
screws or release a jammed drill bit.
WarNINg: Never change the
direction of rotation when the
chuck is rotating, wait until it has
stopped!
Fig.D
4. BattErY caPacItY INDIcatOr (see
Fig.E)
You can press the battery capacity indicator
switch (3) to show the battery capacity.
When the battery capacity indicator (2)
lights up red the battery has less than 30%
of its capacity and should be charged.
Fig.E
a
b
c
a: Full power (green)
b: Full power but will require charging
shortly (yellow)
c: Needs charging (red)
5. usINg tHE sIgHt LIgHt (see Fig.F)
The sight light allows you to keep a clear
view under less illuminated circumstances.
To turn on the light simply press the sight
light switch. (Repeat to turn the light off
again)
NOtE: Please turn off the sight light after
using or the battery will be exhausted soon.
Fig.F
6. autOMatIc sPINDLE LOcK
The screwdriver chuck (1) is locked when
the On/Off switch (7) is not pressed.
This enables screws to be screwed in,
even when the battery is empty and allows
for the machine to be used as a manual
screwdriver.
Important:
When using it as a manual tool, do not
press the On/Off switch (7). Otherwise the
power tool can be damaged.