5
4
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
In the Box
Parts
Tools
A
1
WARNING!
Always take care when removing the packaging to prevent damage to you or to the
grass trimmer.
IMPORTANT!
Before assembling the grass trimmer, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the grass trimmer if
you observe any damaged components.
1. Remove all parts of the grass trimmer from the box and carefully remove all packaging. Take
care not to lose any instructions which may be attached to the tool, these provide important
information which will be required while assembling the grass trimmer.
2. Keep all packaging until the grass trimmer is fully assembled and has been operated
successfully.
NOTE!
Always recycle the packaging in accordance with local recycling schemes.
1a Take off the protection cap from the drive shaft. Push in the button located on the drive shaft.
1b Align the button with the guide recess on the upper shaft and slide the two shafts together.
Rotate the drive shaft until the button locks into the positioning hole. Tighten the knob on the
coupler, securing the two shafts together.
Preparing to assemble the grass trimmer
Assembly
Step 1
A
Engine body with
upper shaft
B
Trimmer head with
lower shaft
C
Front bolts
D
Safety guard+bolt
E
Safety strap
1
Plug wrench &
philips screwdriver
1pc
2
Mixing bottle
B
C
D
1a
1b
40:1
5
10
5
10
2
E
