4
•
Use safety equipment including safety goggles or shield, ear protection,
dust mask and protective clothing including safety gloves.
•
Be careful the harmful/toxic dusts arising from sanding (e.g. Lead paint,
some woods and metal).
•
Hearing protection should be worn, when using sanders.
•
During operation, hold the sander firmly in both hands; grip the front handle
firmly for better control.
•
The sanding pad should not be in contact with the workpiece before it turns
on.
•
Do not touch the moving parts of the sander.
•
Do not set the sander down until the sanding pad has stopped moving.
WARNING
•
The use of an accessory or attachment, other than those
recommended in this Instruction Manual, may present a risk of
personal injury.
•
The tool must be used only for its prescribed purpose. Any use other
than those mentioned in this Manual will be considered a case of
misuse. The user and not the manufacturer shall be liable for any
damage or injury resulting from such cases of misuse.
5
DETAIL SANDER COMPONENT LIST AND ACCESSORIES
Component list:
1. Variable speed switch
2. ON/off
switch
3. Dust
bag
4. sanding
pad
5. Sanding paper clamp
Accessories:
10 x sanding paper
includes:
3 x 60 grip
3 x 80 grip
4 x 120 grip
TECHNICAL SPECIFICATIONS
Voltage:
230V~ 50Hz
Wattage:
200 W
Pad size:
90X187 mm
No load speed:
6,000~12,000 rpm
Noise emission:
Lp 77.0 dB(A);
Lw 91.0 dB(A)
Vibrations:
6.22m/s
2
Weight:
1.5kgs
Insulation Class:
Double Insulation
