Challenge Xtreme 7305368, Инструкция по сборке

Страница: 3 / 15

5 4
Customer Helpline 0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline 0845 450 5299
www.gardenservicecentre.co.uk
A
Main mower deck
(with upper handle
attached)
B
Lower handle
C
Self-tapping screws
2pcs
D
Handle tensioning
knob with nut m8
2pcs
E
Rope guide 1pc
F
Grass collecting
bag 1pc
G
Cable clip 2pcs
1
Spanner & philips
screwdriver 1pc
In the Box
Parts
Tools
A
D
C
1
E
G
F
B
WARNING! Always take care when removing the packaging to prevent damage to you or to the
lawnmower.
IMPORTANT! Before assembling the lawnmower, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the lawnmower if you
observe any damaged components.
1. Remove all parts of the lawnmower from the box and carefully remove all packaging. Take
care not to lose any instructions which may be affixed to the parts. These provide important
information which will be required while assembling the lawnmower.
2. Keep all packaging until the lawnmower is fully assembled and has been operated successfully.
NOTE! Always recycle the packaging in accordance with local recycling schemes.
WARNING! This item requires a two person lift to remove from the packaging. Make sure that
you have sufficient space to put the lawn mower down. Keep your feet apart so that you have a
stable position, bend at the knees and keep your back straight.
Remove the packaging from the handle.
Insert the lower handle into the deck as shown and on each side and fix it with a self - tapping
screw.
NOTE! Press firmly down until the handle bottoms out in the holes or the cables will be too tight
and the handle will not be secure.
Preparing to assemble the lawnmower
Assembly
Step 1 Assemble the lower handle