AUTOMATIC START FUNCTION
If you do not want the coffee maker to start operation immediately, for example now it is 17:10, you
hope that the coffee maker will automatically start at 20:15 in the evening, first follow steps 1 to 5 of
above
section, then you can set the automatic start function as follows:
1.
Press the HOUR and MIN button continuously to set the present time (real clock),
that is 17:10 (See fig. 1). Note: the time cycle is 24 hours.
2.
Press PROG button once and set the delayed starting time by pressing HOUR and MIN button
repetitively, that is 20:15 (see Fig. 2).
3.
After setting the presetting time, press the PROG button once, the LCD will display the current
clock.
4.
Press the ON/AUTO/OFF button twice, the AUTO indicator will illuminate green. The LCD will
display the current clock. You may see the automatic start time by pressing PROG. Note: You
may cancel the automatic start function by pressing ON/AUTO/OFF button once to stop
machine, if you want to brew coffee again immediately, you can press ON/AUTO/OFF button
once to start brewing immediately. If you want to change the automatic start time, only
following the above 1-4 steps again. When the time is due the AUTO indicator will be
extinguished and the BREW indicator will be illuminated, the LCD will display the letter of BREW
on the lower-left corner, then the unit starts brewing.
5.
When the brewing is finished, the timer will record the keeping warm time, once the time has
achieved 2 hours, the coffee maker will shut off the power outlet automatically. For an optimum
coffee taste, serve it just after brewing.
Memory
If the power supply has been broken off or unplug the power cord unintentionally during operation, the
appliance will be continued previous operation automatically from the point when the disconnection occurred
provided that the pause does not exceed 15s, even without pressing any button. In the event the pause
time exceeds 15s, the display shows the default setting, the appliance must be re-started.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each use, always make sure plug is first removed from
wall outlet.
1.
Clean all detachable parts after each use in hot, sudsy water.
2.
Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3.
Water droplets may buildup in the area above the funnel and drip onto the product base during
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of the
product.
4.
Use a damp cloth to gently wipe the keeping warm plate. Never use abrasive cleaner to clean it.
5.
Replace all parts and keep for next use.
