CHAINTECH V915P, Справочное руководство

Страница: 15 / 113

9
Hardware Setup
Having figured out in general what you get, the next job is to bite the
bullet and build your PC
Precautions
When integrating a Pentium 4 processor-based system, be sure to take the
proper electrostatic discharge (ESD) precautions. Consider using ground
straps, gloves, ESD mats, or other protective measures to avoid damaging
the processor and other electrical components in the system.
Warning
Do not touch socket sensitive contacts.
Chaintech assumes no responsibility for the
potential damages caused by this action and
therefore the warranty we provide may be
invalid.
Installing CPU
#1 Disengage Load Lever by depressing down and out on the hook to
clear retention tab. Rotate Load Lever to fully open position at
approximately 135°
#2 Rotate Load Plate to fully open position at approximately 100°.
Remove Socket Protective Cover. With left hand index finger and thumb
to support the load plate edge, engage protective cover finger tab with
right hand thumb and peel the cover from LGA775 Socket while pressing
on center of protective cover to assist in removal.
#3 Locate the two orientation key notches.
#4 Grasp the processor with thumb and index finger. (Grasp the edges
without the orientation notches.) The socket has cutouts for your fingers
to fit into. Carefully place the package into the socket body using a purely
vertical motion. (Tilting the processor into place or shifting it into place
on the socket can damage the sensitive socket contacts.)
#5 Verify that package is within the socket body and properly mated to
the orientation keys