CHAINTECH CT-7NIF4, Руководство пользователя

Страница: 15 / 47

Chapter 2
9
2-3 Main Memory Configuration
This motherboard provides 3 184pin Double Data Rate (DDR) Dual Inline Memory
Modules (DIMM) slots. Which supports PC 1600/DDR200, PC2100/DDR266,
PC2700/DDR333 and PC3200/DDR400 DDR SDRAM modules up to 3GB.
To support Dual-Channel DDR400 please use an additional VGA card to
prevent the onboard VGA to share the system memory.
Install at least one DIMM module on the slots. Memory modules can be installed on
the slots in any order. You can install either single- or double-sided modules to meet
your own needs. The DDR SDRAM memory system consists three banks and each
bank can support up to 1GB memory size. If you only use one bank it does not
matter which one you use and if you use two or more banks, it does not matter
which bank you install first.
DIMM Module Combination
Install at least one DIMM module on the slots. You can install either single- or
double-sided modules in any order to meet your own needs. Memory modules can
be installed in any combination as follows:
Location 64 MB 128 MB 256 MB 512 MB 1.0 GB
DDR 1 V V V V V
DDR 2 V V V V V
DDR 3 V V V V V
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
For maximized Dual-channel ( 128-bit ) result, you must install one of your two
memory modules on DDR3 .