manualshive.com logo in svg

CHAINTECH CT-6SLV, Руководство пользователя

Поделиться
Скачать
CHAINTECH CT-6SLV Скачать руководство пользователя страница 7

7

Getting Started

Features

Over-write power button

The power button on the chassis can be used as a normal power switch as
well as a button to activate Advanced Power Management Suspend  mode.

LED'S indicator

Whenever power to the system is on, the power LED will be lit. If your system
includes a hard disk drive, the hard disk drive LED will be lit only when the
hard disk is being accessed.

CD-ROM drive

The Front panel of the standard system has one drive bay into which the
CD-ROM drive is inserted. (Optional DVD, CD-RW drive)

Floppy disk drive

The Front panel  of the standard system has one drive bay into which
the floppy drive is inserted.

PCMCIA device (Optional)

The PCMCIA device let you extend the capability of your computer by
inserting PC cards (Hot SWAP) true IDE, type II/III ATA Flash Card, ATA
HDD, Compact Flash and Smart Media card.

IEEE1394 port (Optional)

Supports 100/200/400Mbps devices of IEEE1394 such as CamCoder,
Digital Camera, printer, etc.

USB connectors

Plug USB devices such as scanner, speaker, keyboard, mouse, HDD , etc.

Mic-in jack
Connect this jack to a micro-phone cable.

gentle-pc2.p65

2000/5/22, PM 01:50

7

Содержание CT-6SLV





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды