CHAINTECH 7VIL4 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 52

CHAINTECH 7VIL4 Скачать руководство пользователя страница 31

Chapter 3

3-5 Power Management Setup

This section provides information on the Green PC power management functions. By
choosing the Power Management Setup option from the CMOS Setup Utility menu
(Figure 3-1), the screen below is displayed. This sample screen contains the
manufacturer's default values for the motherboard.

Figure 3-6

ACPI Suspend Type

This feature allows user to select a suspend type for the operating system to turn off
peripherals devices, such as CD-ROM players, when they are not in use.

Power Management Option

Power management allows the computer to save electricity when it is not in use by
entering power-saving modes.

HDD Power Down:

Shuts down any IDE hard disk drives in the system after a period of inactivity as set in
this user configurable field. This feature does not affect SCSI hard drives.

Suspend Mode

The Power Management function must not be set to disabled to enable this function. If
the system runs in Standby mode and the Suspend timer expires, all devices regulated by
power management will shut off and the CPU speed will be 0 MHz.

27

«
...
29
30
31
32
33
...
»

Содержание 7VIL4





















































Отзывы:

Нет отзывов