Chapter 2
21
function in BIOS's Integrated Peripherals menu (See Section 3). This board contains
a USB Host controller and includes a root hub connector for optional USB Adaptor
(USB 2/3 and 4/5).
CN24 (Front Audio Connector):
This connector give you the option of a front panel audio jack cable ext. to be plug
into a special custom designed system case. Simply remove the two jumper caps at
pin [
5-6
] and [
9-10
] then plug it into the (optional) cable ext. connector. Pin [
5-6
]
and [
9-10
] are shorted (default) to enable the back panel audio function.
IR 1 (IR Connector):
Select a UART Mode in BIOS's Integrated Peripherals menu the UART port to
support IR function. (See section
3
)
Chapter 3
22
Chapter 3 BIOS Setup Program
Phoenix-Award BIOS ROM has a built-in setup program that allows users to modify
the basic system configuration. This information is stored in CMOS RAM so that it
can retain the setup information, even when the power is turned off.
To enter the
Phoenix-Award BIOS
setup program press the [
Delete key
] when you
Power on
or
reboot
the computer system. The primary screen as shown in Figure
3-1 is a list of the menus and functions available in the setup program. Select the
desired item by your arrow keys and press enter to make the changes. Operating
commands are located at the bottom of this and all other BIOS screens. When a field
is highlighted, on-line help information is displayed on the right side of the screen.
Figure 3-1 Setup Program Initial Screen
