CHAINTECH 7AIV6, Руководство пользователя

Страница: 40 / 49

37
Award BIOS Setup Program
3-11 Supervisor Password & User Password Setting 3-11 Supervisor Password & User Password Setting 3-11 Supervisor Password & User Password Setting 3-11 Supervisor Password & User Password Setting 3-11 Supervisor Password & User Password Setting
There are four different variables that control password settings. The first two are
located under the Security Option function in BIOS Features Setup Menu (Figure
3-1). When the Security Option function is set to Setup, a password is required to
enter BIOS and change BIOS settings. When the Security Option function is set
to System, a password is required to enter both BIOS and the computer's operating
system (for example Windows 98) found on the boot drive. The third and fourth
variables are user password and supervisor password selected in BIOS (Figure 3-1).
The main purpose of separating user and supervisor is to allow only the supervisor
to have control over the settings in BIOS. The user, on the other hand, is only allowed
to access the computer's operating system and change the user password in BIOS.
Note that when there is no supervisor password set, the user password controls access
to all BIOS settings.
3-12 Save and Exit Setup 3-12 Save and Exit Setup 3-12 Save and Exit Setup 3-12 Save and Exit Setup 3-12 Save and Exit Setup
If you select this and type Y (for yes) followed by the [ Enter] key, the values
entered in the setup utilities will be recorded in the CMOS memory of the BIOS
chip.
3-13 Exit Without Saving 3-13 Exit Without Saving 3-13 Exit Without Saving 3-13 Exit Without Saving 3-13 Exit Without Saving
Selecting this option by pressing Y (for yes) followed by the [ Enter] key, let you
exit the setup utilities without recording any new values or changing old ones.