![CHAINTECH 7AIV2 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/chaintech/7aiv2/7aiv2_manual_2585877019.webp)
Chapter 2
16
Optional LTI-IIT Riser (CN11)
This connector is to be connected to an optional
LCD/TV-out adapter card.
CPU/System Cooling Fan Connectors
(
FAN1/FAN2)
These added connectors allow the fan to draw
their power from the mainboard instead of the disk
drive connector.
The board's management extension hardware is
able to detect the CPU and system fan speed in
rpm (revolutions per minute). These connectors
supports 3-pin cooling fans with minimum of
3500 RPM. The wiring and plug may vary
depending on the manufacturer. On standard fans,
the red is positive (+12V), the black is ground,
and the yellow wire is the rotation signal.
CPU Bus Frequency (SW3)
This switch allows you to select between 100MHz
FSB or 133MHz FSB frequency speed.
GND
+12
Rotation
SW3
1
2
3
4
100MHz OFF
ON
OFF
OFF
133MHz OFF
OFF
OFF
OFF
FAN1
FAN2
Содержание 7AIV2
Страница 9: ...6 Chapter 1 Memo...
Страница 45: ...42 Chapter 4 Memo...
Страница 47: ...44 User s Manual Memo...
Страница 49: ...46 User s Manual Memo...