CHAINTECH 7AIA5, Руководство пользователя

Страница: 20 / 53

17
Hardware Setup
WOL (Wake-on-LAN) Connector (CN8)
Enable the Wake Up On LAN selection in BIOS's
Power Management Menu to use this function. The
capability to remotely manage PCs on a network is
a significant factor in reducing administrative and
ownership costs. Magic Packet technology is
designed to give WOL (Wake-on-LAN) capability
to the LAN controller. When a PC capable of
receiving wake up command goes to sleep, the
Magic Packet mode in the LAN controller is enabled.
When the LAN controller receives a Magic Packet
frame, the LAN controller will wake up the PC. This
header is used to connect an add-in NIC (Network
Interface Card) which gives WOL capability to the
mainboard.
To support this function, a switching power
supply with a minimum of 750mA 5VSB
standby signal is required.
CPU Bus
Frequency (JPX1)
CPU Bus Frequency (JPX1)
This switch allows you to select between 100MHz
FSB or 133MHz FSB frequency speed. You must
set the jumper's cap to pins 1-2 for 100MHz or set
the jumper's cap to pins 2-3 for 133MHz FSB.
PS/2 Mouse and Keyboard Ports
If a PS/2 mouse is used, BIOS will automatically
detect and assign IRQ12 to the PS/2 mouse.
Pin Definition
1 Data
2 No Connection
3 Ground
4 + 5V (fused)
5 Clock
6 No Connection
100MHz 133MHz
1 1