CHAINTECH 6WFV, Руководство пользователя

Страница: 16 / 29

Hardware Setup
13
1
Clear CMOS Data Jumper (JP6)
To clear the contents of the CMOS, please follow the
steps below.
1. Disconnect the system power supply from the
power source.
2. Set the jumper cap at location 2~3 for 5 seconds,
then set it back to the default position.
3. Connect the system's power and then start the
system.
4. Enter BIOS's CMOS Setup Utility and choose
Load Setup Defaults. Type Y and press enter.
5. Set the system configuration in the Standard
CMOS Setup menu.
USB Device Power On Function (JP7)
This board is able to be turned on by a USB keyboard
(hot key/Password)or a mouse click. To use this
function, select a device of your choice at the Power
on Function option in BIOS's Integrated Peripherals
screen. You must also set this jumper's cap to pins
2-3 to use this function.
PS/2 Keyboard/Mouse Power-on Function (JP8)
This board is able to be turned on by the PS/2
keyboard (hot key/Password) or a PS/2 mouse click.
To use this function, select a device of your choice
at the Power on Function option in BIOS's Integrated
Peripherals screen. You must also set this jumper's cap
to pins 2-3 to use this function.
Disabled
Enabled
Disabled
Enabled
Normal (default)
Clear CMOS data