CHAINTECH 6OIV3, Руководство пользователя

Страница: 18 / 33

Hardware Setup
15
PS/2 Keyboard Power On Function (JP3)
This board is able to be turned on by the keyboard.
To use this function, enable the Power On Function
option in BIOS's Integrated Peripherals screen
(See section 3-8). You must also set this jumper's
cap to pins 2-3 to use this function. Some out-
of-date keyboards may require larger current than
supplied by the Suspend 5V of modern power
supplies. When using older keyboards disable
this function.
USB Device Power On Function (JP4)
This board is able to be turned on by a USB
keyboard (hot key/Password) or a USB mouse
click. To use this function, select a device of your
choice at the Power on Function option in BIOS's
Integrated Peripherals screen. You must also set
jumper caps to pins 2-3 to use this function.
Onboard Audio CODEC Selector (JP5)
Short pin 1-2 to enable onboard AC`97 CODEC.
Short pin 2-3 to enable CNR (Soft Audio/Modem
riser).
Disabled (default)
Enabled
Disable(default)
1
Enable
1
Onboard CODEC (Default)
1
CNR (Soft-Audio/Modem riser)